40 watt PAR-36
Works as a replacement for the halogen-sealed beam PAR-36 (4.5" bulb) used on many older tractors,
JD 30, 40 & 50 series IH and many others. This light will only fit in normal full size "HOBBS" housings with rubber grommets due to large cooling fins. It will not fit the "GUIDE" brand housings with the "rolled lip". Also it will NOT fit in the new plastic housings used on some later model JD's.
This light has a temperature sensor that will limit the power of the light if the temperature gets too high.
Max effective lumen 2800 - minimum effective lumen 2200
The advertised lumen is when the light is cool enough to operate at 100%
Note: It is a good practice to drill a few holes in the top and bottom of the housing the light is mounted in, this will help the lights cool.
. LED: 40 Watt OSRAM 10W/PC
. Voltage: 10-30 Volt DC
. Lumens: 4000lm Raw, 2800lm Effective
. Power used: 25W / 2A @ 12.5 Volt
. Kelvin: 5500K
. Temperature: -40°F to +140°F
. IP: Waterproof IP68
. Beam: Flood, 40°, or Hi-Lo
. Material: Diecast Aluminum Housing
. Lens: Scratch and UV Resistant Polycarbonate
. Life Time: 50,000 hours
. RFI and EMC filter
HO Par36, HO Par-36, Par-36, Par36, High Output, High, Flood
The 40 watt PAR-36 will not fit the GUIDE brand housings like below, or the new all in one plastic housings.
They will fit into the front fenders with a new "Glare Guard" rubber grommet, SKU LL0597