You have no items in your shopping cart.

66x0 / 77x0 / 88x0 Series

Larsen LED kit made to fit JD 66x0 / 77x0 / 8820 Series combines 

This kit will replace all the halogen bulbs with LED PAR-36 bulbs. You get the 7 front lights and 1 auger light. 8 total. Standard LED 1400 lumen or High Output at 1700 lumen for each bulb. The amp draw on the electrical system will be less than 1/2 of using the halogen lights and compared to the OEM bulbs at 400-600 lumen.

The kit consists of 1 trapezoid pattern light, 2 Hi-Lo lights (3 wire), and 5 flood lights. Easy install, remove the old halogen light, and replace with the new LED light, female spade connectors are included in this kit.

The amp draw on the electrical system will be less than 1/2 of using the halogen lights and compared to the OEM bulbs at 400-600 lumen, the new LED bulbs will light the night with 1400 / (HO 1700) lumens each!

Filters
per page
JD88combine-std
This kit will replace 8 of the halogen bulbs with LED PAR-36 bulbs. You get the 7 front lights and 1 auger light. You can add a Par-36 light for the grain tank if needed.
$211.46 $218.00
JD88combine HO
This kit will replace all the halogen bulbs with LED PAR-36 bulbs. You get the 7 front lights and 1 auger light. 8 total. Using the 1700 lumen High Output Par-36 LED lights.
$252.20 $260.00
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.
$32.00
40w Par-36
High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size "HOBBS" housings with rubber grommets due to large cooling fins. It will not fit the "GUIDE" brand housings with the "rolled lip". Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.
$39.00
Par-36
PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.
$27.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30watt rated / 18 watt use. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$10.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket.
$8.00
LL0106
The LED-20 is a very small light, but with 2 10 watt CREE led chips, it has a great light output. So small it fits almost anywhere. Excellent on combine headers for stubble light.
$34.00
LL0328
LED-486, Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.
$36.00