Products tagged with 'flasher'

LED-486, Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.

LED-486, Amber lens on one side and Red on the other. Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. The amber and red sides are powered separately, you can have the red on constant and only connect the amber to the signal wire. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.

LED-2206 RED is a red rectangular light

LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.

Set of 2 amber flashers (right and left) for some JD tractors, 7000/8000/9000 series.

Set of 2 amber lights (right and left) for JD, NH, and more. Now with a built-in resistor for an easy install. OEM Part NH 86507530, JD RE39582, RE39581, RE39582, CIH 1983404C1.

LED-2208 Amber clearance light for CIH/NH. Replaces CIH part 51446421, 51431551.

2 x LED-2200 Amber w/ built in resistor, replaces OEM Part Numbers: RE217551, AT151873, & AT326622. Direct fit, Plug & Play.

LED-547 White with amber flasher - set of 2 - right and left side. LED Light for direct replacement, Plug & Play. Light will bolt right into factory light housing. This light is the front corner amber light with an attached white work light. The amber light has a built-in resistor to work with the original factory flasher. Replaces Case/IH Part Number: 279219A1 & 279220A1. Right and left light included.

Amber LED Light for direct replacement, Plug & Play. Light will bolt right into factory light housing. Set of right and left amber light. The light has a built-in resistor to work with the original factory flasher. Replaces Case/IH Part Number: 279223A1 + 279224A1