30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.
High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size "HOBBS" housings with rubber grommets due to large cooling fins. It will not fit the "GUIDE" brand housings with the "rolled lip". Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.
High Power LED 2 x 5 LED light for the top front cab on the 6000-7000-8000 series tractor. 30° beam. Can also be used in the nosecone on the older 55 and 60 series tractors. Lumen: 3000 Raw, 2400 Effective. 30° beam.
High Power LED 2 x 5 LED light for the top front cab on the 6000-7000-8000 series tractor. 30° beam. Can also be used in the nosecone on the older 55 and 60 series tractors. Lumen: 3000 Raw, 2400 Effective. 60° beam.
JDD84 60° is a 3" LED light for replacing the smaller grill light on some JD "R" series tractors and sprayers. (For headlights assemblies with 3 lights on each side) If you are replacing factory HID lights, you will need adapter cable LL0591 - Adapter 9005 male to H11/ 880 female. JD part # AL209455
JDD84-3 is a 3" LED light with 3 mounting "arms" for replacing the smaller grill light on some JD "R" series tractors. (For headlights assemblies with 3 or 4 lights on each side) This is the 1st light to the right of the center grill (looking forward) Only 1 is used.
LED-4060 is used for the 20 and 30 series JD tractors + more. Replaces John Deere Part Numbers: RE271574, RE181282, RE180613, RE271573. Replaces Buhler/Versatile Part Numbers: 86034865, 86034864, 86038024.
LED-4060 Flood is used for the 20 and 30 series JD tractors and other machines. Replaces John Deere Part Numbers: RE271574, RE181282, RE180613, RE271573. Replaces Buhler/Versatile Part Numbers: 86034865, 86034864, 86038024.
The LED-408U is a complete LED light that can replace OEM PAR-36 style lights. It includes hardware for all 3 locations on a JD SG cab, in front fenders, top of rear fender, and top rear cab. 3200 lumen vs. the OEM lights at 600 lumens. This light uses 3D reflector cups for the best light output.
This is the large high beam light in the grill (the center light of the 3 lights on each side) on the newer models of JD "R" series tractors. Includes rubber grommet.
An oval LED-6060 Hi-Lo LED light for CaseIH combines and some JD tractors. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600. The light is made especially for use on the CIH combines, but can be used on some JD tractors. Effective Output: Low beam 2700 lumen, high beam 5400 Lumen
LED-6075 Oval LED Light . This is a light similar to the Thomas HP-5 light, but 1000 lumens brighter at 6000 effective lm. Includes a pigtail wire for power. Select from 20° / 40° / 60° / 80° beam types.
Perfect size light with the 1" ball mount for the center grill lights on the JD 8000/8010 series tractors. 6 x 5 watt CREE LED's, 5200 kelvin, 2700 lumen effective. This light is now made so only half the LED's turn on if on low beam, on high beam all LED's are on. Adapter cable that connects the wires from the corner lights to the center lights included and is needed for the function of the lights.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.
PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.