Search
Filters

Larsen Lights Tuffplus LED Headlight 7” Round, Model A0101 Hi Lo

Larsen Lights Tuffplus LED Headlight 7” Round, Model A0101 A0101 is a 7" Round LED HI-Lo headlight.
Availability: 27 in stock
$119.00

 

7” Round, Model A0101 Hi Lo

 

 

DOT approved : FMVSS 571.108

 

Excellent on the road (DOT) headlights. Perfect cut off line on low beam so you don't blind oncoming traffic. Nice white light makes it safer to drive at night. You will feel more awake due to the white light, that also helps you see whats in front of your big rig...

 

How does this compare to halogen sealed beam ? A standard halogen sealed beam is around 650 effective lumen on high beam, LED is at 1589 lumen on high beam. It is twice the light, and the light is the nice white color!

On motorbikes you might need the adaptor, please see this video :Youtube

Specifications :

 

Model # A0101

Tested Lumen :

2042 Lumen raw / 1134 effective @ 28W on Low Beam ( 2.3 amp @ 12V)

3180 Lumen raw / 1589 effective @ 36W on High Beam ( 3.0 amp @ 12V)

Lumens are tested after 20 minutes when the light output is stable.

 

9-36V configuration, can be used with 12 volt systems or 24 volt !

Step less thermal management built in

Hard coated raw poly-carbonate cover stands up to harsh environmental conditions.

Die-cast aluminum housing

4 LED's for Low beam

4 LED's for High beam, all on for High beam

Replaces PAR-56 size

Connector : H4

Included : H4 to H13 converter

Resistor included.

Color temperature : 6000k

Up to 20000 hours lifetime

 

DOT SAE HL 15 LED VOL

DOT approved : FMVSS 571.108

 

 

 

7” Round, Model A0101 Hi Lo

 

 

DOT approved : FMVSS 571.108

 

Excellent on the road (DOT) headlights. Perfect cut off line on low beam so you don't blind oncoming traffic. Nice white light makes it safer to drive at night. You will feel more awake due to the white light, that also helps you see whats in front of your big rig...

 

How does this compare to halogen sealed beam ? A standard halogen sealed beam is around 650 effective lumen on high beam, LED is at 1589 lumen on high beam. It is twice the light, and the light is the nice white color!

On motorbikes you might need the adaptor, please see this video :Youtube

Specifications :

 

Model # A0101

Tested Lumen :

2042 Lumen raw / 1134 effective @ 28W on Low Beam ( 2.3 amp @ 12V)

3180 Lumen raw / 1589 effective @ 36W on High Beam ( 3.0 amp @ 12V)

Lumens are tested after 20 minutes when the light output is stable.

 

9-36V configuration, can be used with 12 volt systems or 24 volt !

Step less thermal management built in

Hard coated raw poly-carbonate cover stands up to harsh environmental conditions.

Die-cast aluminum housing

4 LED's for Low beam

4 LED's for High beam, all on for High beam

Replaces PAR-56 size

Connector : H4

Included : H4 to H13 converter

Resistor included.

Color temperature : 6000k

Up to 20000 hours lifetime

 

DOT SAE HL 15 LED VOL

DOT approved : FMVSS 571.108

 

 

Write your own review
  • Bad
  • Excellent
Existing reviews
Don't hesitate to purchase! I like better than JW Speaker.
I have installed a black set of these on my 2010 Jeep Wrangler. The original headlights were so dim I would try to turn them on again when driving at night. Then I tried a set of LED lights that were sold by Inspired Engineering. They were bright but they were bright EVERYWHERE! Absolutely no cutoff to the low beam pattern. They would blind oncoming drivers and I would even have trucks pull over to let me pass. I tried to lower the light pattern but I got to the point that the high beam was just 2 dots 20ft in front of my Jeep.Then to add insult to injury the high beams created static in my stereo. That's not going to work.
This brings me to a set of Trucklights. Nice lights but kind of $$$ for what you get. I broke one while off road and just put the stock back in for awhile. They were better than stock but I wasn't blown away by them.
Then a family member got a set of JW Speakers. I installed and adjusted them for him in my garage. At 25 ft from the wall I was able to get the beam pattern adjusted according to guidelines and they had a nice cutoff. I did notice that they were pretty bright but had hotspots where the beams were concentrated. This was fine but left dark shadows in areas when driving at night. Now they were WAY better than the originals and I was jealous but again at the $$$ I wasn't ready to pull the trigger.
  Then someone recommended the A0101s and I searched around for them. I purchased a set from Larson Lights. They shipped them fast and I installed them. To start off with they do require a set of anti flicker harnesses. I used my Inspired Engineering set and they worked perfectly. The cutoff is AMAZING. Draw a horizontal line and you can make it dark above it and daylight below it. There is a real even light pattern from the lights. No hot spots, no dark shadows. The output is very white and bright ( I think brighter than the JWs) but I have yet to have a single car flash me. The high beams just turn the daylight on in front of you. Again no hotspots and no dark areas. Just light everywhere and best of all.... No static in my radio. I have only run these for a month so their long term durability isn't tested yet but they look and feel high quality. I am in no rush to replace them so I hope they last a good long time!
From: Guest | Date: 1/30/2017 3:23 PM
Was this review helpful? Yes No (3/2)
Best LED headlight
These are about the only genuine Tuffplus A0101 headlights you can buy.  All the others are knock offs (you can tell by looking at the where the wire comes out of the headlight housing, and also the circuit board if you open them up).  The cut off is sharp, with a slight rise to the right.  No weird hourglass artifact in the middle like other headlights.  Built in anti flicker for the PWM dimming works ok.
From: Guest | Date: 7/19/2017 11:49 AM
Was this review helpful? Yes No (1/0)