You have no items in your shopping cart.
Image Gallery (Refresh Page For New Images)
Larsen LED kit for CaseIH 9xx0 series, Silver
Replaces all standard lights with LED lights, a total of 8 lights in the packet.
$0.00
Cushion Set, Cream Embossed Vinyl, Unassembled - (2 pc.)
Restore your tractor with this high quality Cushion Set made with embossed vinyl. Carefully hand stitched in the USA.Upper Back Cushion Brackets are sold separately. SAVE buy as complete kit, SW159857EU.Includes: SW159859AE(Seat Cushion), SW159860AE(Back Cushion)
$282.43
Piston Ring Set
Supply the thickness of each ring to make sure you receive the correct Piston Ring Set.
$18.75
TL7810L - Left side LED Corner Light for John Deere Tractors 7600-7810.
Left side LED Corner Grill Lights, fits into the hood of John Deere Tractors. Uses Original Mount and Wiring, Plug and Play. Replaces OEM Part Number John Deere: RE151564(Left)
$95.00
Textured Rubber Floor Mat Overlay
Padding is included for extra height comfort. Easy to install- lays over the existing Floor Mat. Helps to reduce the noise in the cab of your equipment. Durable 1/2" thick textured rubber.
$102.47
Clutch Alignment Tool, .786" Pilot Dia., 14 & 10 Spline
This tool is for installation purposes not returnable.
$26.25
Starter - New, 12V, OSGR, CW, Aftermarket Nippondenso
Starter - New, 12V, OSGR, CW, Aftermarket Nippondenso
$181.21
11" Single Stage Clutch Kit, w/ Bearings - Reman
Heavy Duty for 70716, 1500655R 1500655N.Includes: 830574 (PPA), 830575 HD6 (Disc), 8301160 (Release Bearing), Thrust Washer 836204 (Pilot Bearing)
$409.91
Powershift Clutch Kit
Contents for C1, C2 rear PTO clutches.Includes: (12) R27995 Friction Discs, (8) R46391 Separator Plates, (3) R57345 Separator Plates, (1) R80813 Separator Plate, Manifold Gasket, Housing Gasket, (6) Piston Seals, (2) Seals, (6) Torque Bolts
$534.87
Hydraulic Breakaway Coupler, Female
It is recommended to purchase in quantities of two (pressure return).Includes: Rubber Plug
$57.49
Larsen LED kit for JD 7x80 Forage Harvester
Larsen LED kit for JD 7x80 Forage Harvester. 11 lights included in this kit. 6 for the cab, 4 for the cab lower platform, 1 for the spout, and 1 for the rear light. Plug and play.
$0.00
10" Single Stage Pressure Plate - Reman
Our core supply fluctuates for this part. We will do our best to fulfill your order, but in the event we do not have a core we will contact you with options.Used w/ R16930 or 533703 Discs.
$99.99
Starter - New, 12V, PMGR, CW, Aftermarket Mitsubishi
Oblong mounting holes, replaces older 11 tooth units.
$204.95
Larsen LED light kit for newer CIH STX - Standard kit with Oval lights.
This kit is for the newer models with the new style headlights. Replaces the work lights with LED lights, a total of 8 lights in the kit. (4 rear fender, 4 rear cab) This kit uses the Oval LED-666 lights on the rear fenders and on the cab. Add the top cab side lights if needed, this is an option from the factory and not all models have them. If your tractor does not have them and you want to add them, you need the mount kit from CIH. (or make your own). Select the complete headlights / center grill lights or the LED-409 for replacing the center lights only. (3 or 6 lights needed depending on the model - wide or standard)
$0.00
Larsen LED kit made to fit JD 9x60 series combines
For JD 60 series combines with rectangular headlights, this kit will convert all 6 cab lights to LED using complete LED lights. The light for the unload auger included. Connectors on the 3 smaller lights will be the 880 series unless you contact us with other instructions.
$0.00
Cushion Set, Red Embossed Vinyl - (3 pc.)
Restore your tractor with this high quality Cushion Set made with embossed vinyl. This Cushion Set is carefully hand stitched in the USA.Includes: Seat Cushion, Back Cushion, Upper Back Cushion
$347.41
Larsen LED kit for AGCO Allis RT150 (series)
LED lights for the AGCO Allis RT150 (series) tractors. This kit includes 2 headlights (optional), 4 front cab lights, and 4 rear cab lights. Make sure the headlights match the setup in the picture.
$0.00
9" Single Stage Pressure Plate, w/ 1-3/8" 19 Spline Hub - Reman
Our core supply fluctuates for this part. We will do our best to fulfill your order, but in the event we do not have a core we will contact you with options.Interchangeable w/ M3704648.
$228.70
11" Transmission Disc, 6 Pad, w/ 1-1/16" 16 Spline Hub - Reman
Heavy Duty for R38498 R38500.
$153.71
7-1/4" Diaphragm Clutch Unit - New
Included spacers must be used during installation between Flywheel and Pressure Plate.Includes: 1273243 (PPA) M3282561N (Transmission Disc)
$173.21
11" Dual Stage Pressure Plate - New
11" Dual Stage Pressure Plate - NewIncludes: PTO Disc, Transmission Disc
$638.21
Ford NH Genesis Series
This kit is for the Ford NH 8x70 series Genesis tractors. It includes LED lights for the 4 rear work lights and the front upper 2 cab lights. Select headlight type and extra lights if needed.
$0.00
Starter - New, 12V, OSGR, CW, Aftermarket Nippondenso
Mounting hole is unthreaded, 4" ID (13.3mm).
$337.42
13" Transmission Disc, 6 Pad, w/ 1-3/4" 10 Spline Hub - New
Large pads.Optional for FD150C Disc.
$168.71
EHP-4 Oval, Amber flasher
EHP-4 Oval, Amber flasher for the built-in "flush-mounted" lights on the "R" series JD tractors and sprayers.
$94.00
Baldwin Brake/Hydraulic/Power Steering Filter, Element
Baldwin Brake/Hydraulic/Power Steering Filter, Element
$14.37
Thrust Bearing Kit, .030" Oversize
Includes:• Main Thrust Bearing• HCTAR77747 Thrust Washer Set
$48.74
Grammer Air Suspension Assembly
This assembly converts hydra-cushioned suspension to Air Suspension. Grammer model MSG93 compact 12V Air Suspension commonly found on Case John Deere tractors. Manual weight adjustment, with front controls.Includes: Air Suspension, Slide Rails, Brackets Installation Instructions
$843.54
Larsen LED kit made to fit JD S Series Combine
LED light kit for JD S series combines, improve the light output by 200% or more compared to the OEM light kits. Includes the 8 stadium lights, lower cab stubble lights, discharge lights, and 1 auger light.
$0.00
Clutch Alignment Tool, .984" Pilot Dia., 11 & 17 Spline
This tool is for installation purposes not returnable.
$26.25
Injection Pump, CAV/Lucas
To assure proper fit function the manufacturer numbers must match on the old new pump.
$612.35
Textured Rubber Floor Mat Overlay
This is a flat Floor Mat, it is not molded. Padding is included for extra height comfort. Easy to install- lays over the existing Floor Mat. Helps to reduce the noise in the cab of your equipment. Durable 1/2" thick textured rubber.
$128.72
Cushion Set, Black Vinyl, 22-1/2" x 14-5/8" - (2 pc.)
This Cushion Set fits the electric start models. Seat Cushion measures 22-1/2" x 14-5/8".Restore your tractor with this high quality Cushion Set made with embossed vinyl. Carefully hand stitched in the USA.Includes: Seat Cushion, Back Cushion
$139.96
Larsen LED kit for CaseIH SPX 4430 Sprayers.
Larsen LED kit for CIH 4430 Sprayers. Kit includes the headlights, center grill light, and 7 work lights. Blue boom lights can be added if needed.
$0.00
Dana/Spicer Complete Tie Rod Assembly, MFD, M36 x 1.5 Thread
MFD tractors, M36 x 1.5 Thread, w/ standard suspended front axles.
$696.34
LED-20 flood
The LED-20 is a very small light, but with 2 10 watt CREE led chips, it has a great light output. So small it fits almost anywhere. Excellent on combine headers for stubble light.
$33.00
Steiger Tractors Option 4
Option 5 - High power LED kit, you will need to run a new fused wire feed to the lights, the OEM wires can not handle the amp load needed. Included : 4 x LED-90 flood lights for the rear fender, 2 x LED-80 for the front fenders, choose round or rectangular headlights.
$0.00
Generator - New, 12V, 22A, Aftermarket Lucas
Tach Drive capable. Unit may or may not include a fan. DE 12mm-1.25 w/ keyway, worm on CE.
$147.46
Alternator - New, 12V, 120A, K1, Aftermarket Bosch
OEM debris shield may NOT fit on replacement units.
$133.71
Larsen LED kit for CaseIH 9xx0 series, Gold
Replaces all standard lights with LED lights, a total of 8 lights in the packet. Keep in mind that the LED-90 uses 6.3 amp, 1.5 amp more than a standard 55 watt halogen light.
$0.00
Larsen LED kit for CIH STX "Platinum"
Replaces the work lights with LED lights, a total of 10 lights in the packet. The Platinum kit uses the LED-90 floodlights on the rear fenders and the LED-660 trapezoid lights on the cab. Select complete headlights if needed. Note: The LED-90 use more amp than the OEM lights, we have not had any trouble with the STX using this kit, but if there is any flickering from the lights after install, you will need a better power source / better wires.
$0.00
12" Transmission Disc, 4 Pad, w/ 1-3/4" 27 Spline Hub - Reman
Large pads.Heavy Duty for W165356.
$134.96
Sears Mid Back Seat, Asphalt Gray Fabric, w/ Air Suspension
Includes Compact Air Suspension, Vertical Adjustable Arm Rests, Tilt, Slide Track, 6.00" Fore AFT Adjustment, OPS and Seat BeltThis Gray Fabric Seat is equipped w/ a compact air suspension designed to absorb shock keep drivers comfortable, has adjustable arm rests, reclining ergonomic contoured seat and back cushions. A retractable seat belt is included for safety. Some minor drilling may be required.
$786.05
Hydraulic Torque Amplifier, Super, w/ Heavy Duty Sprag & Lower Driven Gear
Upper gear w/ 25 teeth, lower gear w/ 47 teeth.Includes: Super TA w/ Heavy Duty Sprag, (4) Direct Drive Discs, (3) Anti-Freewheel Discs Lower Driven Gear
$1,117.27
Compressor Mounting Bracket, Sanden Style
Mounting bracket included in 88830934.Includes: Bracket Hardware
$108.73
Cushion Set, Black Vinyl, 22-1/2" x 14-5/8" - (2 pc.)
This Cushion Set fits the electric start models. Seat Cushion measures 22-1/2" x 14-5/8".Restore your tractor with this high quality Cushion Set made with embossed vinyl. Carefully hand stitched in the USA.Includes: Seat Cushion, Back Cushion
$139.96
12" Single Stage Pressure Plate - Reman
12" Single Stage Pressure Plate - RemanIncludes: (4) HR95827 Friction Discs
$792.30