Search

LED Beacon warning light, flexible rubber base, pole mount. If pole is needed, please order below.

New Heavy Duty LED beacon, twist on lens, tower reflector. LED Beacon warning light, flexible rubber base, pole mount. If a pole is needed, please order below.

LED-660 is a 4x6 style LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page. Note: This light will be replaced by the LED-760.

LED-2206 RED is a red rectangular light

LED-2206 w/ built in resistor. Used on CaseIh, IH, FNH, Versatile/Buhler and more. Replaces OEM Part Numbers: 92185C1, 216044C91, 216044C92, 92260C1, 130882C91, 107324C91, V93104, V77050, 9706415, 86014019, 86023276, 86016518, 86012669, 87053368, 83977683, & 8770630.

This Genuine Grammer #MSG95G/741 Seat is equipped with an array of features to meet the specific needs of the job and for operator comfort. It features an air suspension with a 12-volt compressor, a fore/aft isolator to absorb jolts, and a backrest extension for extra backrest height. Easily adjust the lumbar support for optimal back comfort or one of the four adjustable seat depth/tilt positions to reduce pressure on knees.Some minor drilling may be required.The S8301454 Grammer Mid Back Seat, Brown Fabric w/ Air Suspension fits equipment brands such as: AGCO, Allis Chalmers, Bobcat, Case, Case IH, Caterpillar, Challenger, David Brown, Deutz, Hagie, John Deere, Komatsu, Kubota, MacDon, Massey Ferguson, McCormick, New Holland, White

Expansion Valve, BlockThe 888228 Expansion Valve, Block fits equipment brands such as: Ag-Chem, Allis Chalmers, Apache, Case, Case IH, Caterpillar, Challenger, Claas, International, JCB, John Deere, Massey Ferguson, McCormick, New Holland, SpraCoupe, Steiger, Versatile, Walker, White

Capillary tube measures 36. Cold On = 33 degrees. Cold Off = 26 degrees.The 881126 Thermostatic Switch, Rotary fits equipment brands such as: Allis Chalmers, Case, Case IH, Caterpillar, Claas, Deutz, Ford, Gleaner, Hesston-Fiat, John Deere, Massey Ferguson, McCormick, New Holland, Versatile

This Genuine Grammer #MSG95G/741 Seat is equipped with an array of features to meet the specific needs of the job and for operator comfort. It features an air suspension with a 12-volt compressor, a fore/aft isolator to absorb jolts, and a backrest extension for extra backrest height. Easily adjust the lumbar support for optimal back comfort or one of the four adjustable seat depth/tilt positions to reduce pressure on knees.Some minor drilling may be required.This Seat is featured in our blog post, "Make Spraying Season Successful: Spring Maintenance for Sprayers." Read it here.The S8301453 Grammer Mid Back Seat, Black & Gray Fabric w/ Air Suspension fits equipment brands such as: AGCO, Allis Chalmers, Bobcat, Case, Case IH, Caterpillar, Challenger, Claas, David Brown, Deutz, Fendt, Ford, Gleaner, Hagie, Hesston-Fiat, John Deere, Komatsu, Kubota, Massey Ferguson, McCormick, New Holland, Steiger, Versatile, Volv

Includes: 88146204, 88146The 8814620446 Seltec/Tama TM16 Compressor, w/ 2 Groove Clutch & Manifold - New fits equipment brands such as: AGCO, Case, Case IH, Challenger, Hesston-Fiat, Massey Ferguson, McCormick, New Holland, New Idea, Steiger

Low Pressure SwitchThe 88122579A1 Low Pressure Switch fits equipment brands such as: Case, Case IH, McCormick, New Holland

Blower Switch, w/ ResistorsThe 881116 Blower Switch, w/ Resistors fits equipment brands such as: AGCO, Allis Chalmers, Bobcat, Case, Case IH, Challenger, Deutz, Ford, Gleaner, Hesston-Fiat, International, JCB, John Deere, Massey Ferguson, McCormick, New Holland, Steiger, White

Without teflon thrust washer.The 8301160 Release Bearing, 2.373" ID fits equipment brands such as: Case, Case IH, International, McCormick

It is recommended to purchase in quantities of two (pressure & return).Includes: Dust PlugThe HA177478 Hydraulic Breakaway Coupler, Female fits equipment brands such as: Case, Case IH, David Brown, McCormick

Starter - New, 12V, DD, CW, Aftermarket LucasThe HM3581576 Starter - New, 12V, DD, CW, Aftermarket Lucas fits equipment brands such as: AGCO, Allis Chalmers, Case IH, Landini, Massey Ferguson, McCormick, White

Sanden SD7H15SHD Compressor, w/ 2 Groove Clutch - NewThe 880469 Sanden SD7H15SHD Compressor, w/ 2 Groove Clutch - New fits equipment brands such as: AGCO, Case, Case IH, Challenger, Hesston-Fiat, Massey Ferguson, McCormick, New Holland, New Idea, Steiger

2WD machines.The HH67527 Wheel Hub, 2WD, 6 Bolt fits equipment brands such as: Case IH, International, McCormick

Dependable & hardworking comfort is what you can expect from Grammer's #MSG85/721. It's mechanical light duty suspension has a stroke of 3.9", a height adjustment of up to 3.1", weight adjustment & fore/aft adjustment that accomodates all body types for a more comfortable ride in even the most demanding conditions. Easily adjustable lumbar support for optimal back comfort. A retractable seat belt is included for safety. Some minor drilling may be required.This Seat is featured in our blog post, "Make Spraying Season Successful: Spring Maintenance for Sprayers." Read it here.The S8301528 Grammer Mid Back Seat, Black & Gray Fabric w/ Mechanical Suspension fits equipment brands such as: Allis Chalmers, Bobcat, Case, Case IH, Caterpillar, Challenger, Claas, David Brown, Fendt, Ford, Gleaner, Hagie, John Deere, Komatsu, Kubota, MacDon, Massey Ferguson, McCormick, New Holland

MFD Carraro front axle.The HH137048 Outer Tie Rod, MFD, RH fits equipment brands such as: Case IH, McCormick

Alternator - New, 12V, 65A, Aftermarket LucasThe HA188590 Alternator - New, 12V, 65A, Aftermarket Lucas fits equipment brands such as: Case IH, McCormick

MFD tractors.The HA1966127 Ball Joint, MFD fits equipment brands such as: Case IH, McCormick

Without resistor.The 88178454A2 Blower Motor Assembly, Dual fits equipment brands such as: Case, Case IH, McCormick

Left and right hand.Gas Struts assist in safely opening and closing doors, hoods & windows on a wide variety of equipment. Gas Struts are also commonly referred to as Gas Shocks or Gas Springs and are available in a wide range of lengths, materials, and forces.Read more about Hy-Capacity’s Gas Struts in our blog!The 1977416 Cab Door Gas Strut, 9.625" fits equipment brands such as: Case IH, McCormick

It is recommended to purchase in quantities of two (pressure & return).The HA370506 Hydraulic Breakaway Coupler, Female fits equipment brands such as: Case IH, McCormick

Pilot BearingThe 836204 Pilot Bearing, 0.786" ID fits equipment brands such as: Allis Chalmers, Case, Case IH, Cockshutt, International, John Deere, Landini, Mahindra, Massey Ferguson, McCormick, New Holland, White

Gas Struts assist in safely opening and closing doors, hoods & windows on a wide variety of equipment. Gas Struts are also commonly referred to as Gas Shocks or Gas Springs and are available in a wide range of lengths, materials, and forces.Read more about Hy-Capacity’s Gas Struts in our blog!The 189447 Rear Window / Windshield Gas Strut, 19.0625" fits equipment brands such as: Case IH, McCormick

2WD machines.The HH1537872 Inner Tie Rod, 2WD fits equipment brands such as: Case IH, McCormick

Includes teflon thrust washer.The 8302079 Release Bearing, 2.373" ID fits equipment brands such as: Case IH, McCormick

Genuine Sanden SD7H15 Compressor, w/ 2 Groove Clutch - NewThis Sanden Compressor is featured in our blog post, "Make Spraying Season Successful: Spring Maintenance for Sprayers." Read it here.The 8804478 Genuine Sanden SD7H15SHD Compressor, w/ 2 Groove Clutch - New fits equipment brands such as: AGCO, Case, Case IH, Challenger, Hesston-Fiat, Massey Ferguson, McCormick, New Holland, New Idea, Steiger

OEM replacement Evapaorator Core.The 88251389A1 Evaporator, Tube & Fin, w/ Heater Core fits equipment brands such as: Case IH, McCormick

Dependable & hardworking comfort is what you can expect from Grammer's #MSG85/721. It's mechanical light duty suspension has a stroke of 3.9", a height adjustment of up to 3.1", weight adjustment & fore/aft adjustment that accomodates all body types for a more comfortable ride in even the most demanding conditions. Easily adjustable lumbar support for optimal back comfort. A retractable seat belt is included for safety. Some minor drilling may be required.The S8301452 Grammer Mid Back Seat, Black Vinyl w/ Mechanical Suspension fits equipment brands such as: Allis Chalmers, Bobcat, Case, Case IH, Caterpillar, Challenger, David Brown, Ford, Hagie, Hustler, Jacobsen, John Deere, Komatsu, Kubota, MacDon, Massey Ferguson, McCormick, New Holland, TORO, Volvo

Inline Receiver Drier.The 8890163 Inline Receiver Drier fits equipment brands such as: Case, Case IH, International, McCormick, New Holland

MFD tractors.The HA1966125 Ball Joint, MFD fits equipment brands such as: Case IH, McCormick

Includes: PPA, Transmission Disc, 8302079 (Release Bearing), Thrust Washer & 836204 (Pilot Bearing)The 8301162 KIT 12-1/4" Diaphragm Clutch Kit, w/ Bearings - New fits equipment brands such as: Case IH, McCormickThe 8301162 KIT is a substitute for the following discontinued products: 8301161 KIT, 8301162R KIT, 341723N, 223807NU2

This tool is for installation purposes & not returnable.The 8301138 Clutch Alignment Tool, .750" Pilot Dia., 10 & 10 Spline fits equipment brands such as: Case, Case IH, International, ISEKI, McCormick, White

LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.

Gas Struts assist in safely opening and closing doors, hoods & windows on a wide variety of equipment. Gas Struts are also commonly referred to as Gas Shocks or Gas Springs and are available in a wide range of lengths, materials, and forces.Read more about Hy-Capacity’s Gas Struts in our blog!The HA276036 Hood Gas Strut, 23.250" fits equipment brands such as: Case IH, McCormick