Short snout (3.00"). Front Crankshaft Key HCTR116311 is required for the front damper. Bearings not included.In some blocks with casting R40620 the crank may hit the block near the oil pump mounting and requires grinding approximately 1/8" from the crank or block for clearance.This crankshaft is featured in our blog post, "Rebuild your Engine during your Winter Downtime." Read it here.The HCTRE53422 Crankshaft fits equipment brands such as: John Deere
Includes: (1) Crankshaft (1) HCPU5ME0007 Rod Bearing Set (1) HCPU5MB0011 Main Bearing Set (1) HCP3113755161 Thrust Washer SetThe HCPZZ90091 Crankshaft Kit fits equipment brands such as: Massey Ferguson, Perkins, White
Bolt on counterweights. Bearings included. Lip Style rear main seal.Includes: (1) Crankshaft (1) HCP85036 Rod Bearing Set (1) HCP68084 Main Bearing Set (1) HCP3113721121 Thrust Washer Set The HCPZZ90078 Crankshaft Kit fits equipment brands such as: Allis Chalmers, Massey Ferguson
-The HCR1584NYR Crankshaft, no gear, splined nose, counterbalancer gear on center of shaft fits equipment brands such as: Allis Chalmers, Ford, International, New Holland
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.