You have no items in your shopping cart.

IH 666 / 686 with 3 flood lights

LED light conversion for IH 666 & 686. 3 Par-36 flood lights, 2 x Par-36 Hi-Lo LED lights are included in this kit. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
SKU: IH6x6-3
*
$0.00
+ -
Notes:

All prices are USD. If imported into Canada/Internationally there will be brokerage costs collected by the carrier. Check the"Canada/World" link at the top of the page for more info.  Please note that Hy-Capacity items can not be shipped to Canada / International.

IH 666 & 686

 

LED light conversion for IH 666 & 686.  3 Par-36 flood lights,  2 x Par-36 Hi-Lo LED lights are included in this kit. 

The Par-36 lights are the 4.5“ round lights that install into the existing housings, all you have to do is remove the old light, and install female spade connectors on the wires,(Included) then re-install the light.

This kit will improve your lighting by 200-300%, and lower the electrical amp draw by 1/2 !

The standard Par-36 halogen is around 600-800 lumen, the Par-36 LED is 1400 lumen each light.

Lights used in this kit can be found in "Related Products"

IH 666 & 686

 

LED light conversion for IH 666 & 686.  3 Par-36 flood lights,  2 x Par-36 Hi-Lo LED lights are included in this kit. 

The Par-36 lights are the 4.5“ round lights that install into the existing housings, all you have to do is remove the old light, and install female spade connectors on the wires,(Included) then re-install the light.

This kit will improve your lighting by 200-300%, and lower the electrical amp draw by 1/2 !

The standard Par-36 halogen is around 600-800 lumen, the Par-36 LED is 1400 lumen each light.

Lights used in this kit can be found in "Related Products"

Use On Below Models (Click to expand)
International
Tractor
666 686
Existing reviews
Great Product
Zane Werner 4/15/2020 8:33 PM
Well worth the money. They look sharp on the tractor and much improved visibility, plus saving alternator life on top of that!
Was this review helpful? Yes No (1/0)
Write your own review
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$16.00
LL0328
LED-486, Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.
$36.00