LED-4643 Hi-Lo, LED Headlight for compact & sub-compact John Deere Tractors. High/Low beam, Uses Original Mount and Wiring, Plug and Play.
headlights. Replaces JD Part Number LVA14946 .
LED-9306, Oval Corner Lights fits into the hood on some John Deere Tractors. Uses Original Mount and Wiring, Plug and Play. Replaces JD Part Number : RE205361, RE181916. If you are replacing an HID light, you will need a new connector for your tractor, or an adapter - male 9005 to female H11. Note that this light is sold as an right and a left side light - you need to order both for a set.
LED-1201 - Headlight set for some T / TG models. Replace your old yellow halogen headlights with LED headlights - cheaper than new OEM halogen headlights, and much brighter. If you have some (2 or 4) OEM HID lights, you need adapter cable LL0593 to make the connection. Order the adapters from the link in the description or from the related products field.
Set of right and left headlight for CIH tractors, & Sprayers. This light has "centering bushings" that will center the lamp in the bezel. Please compare to your model before ordering.
Set of right and left headlights for most of the 2008 and newer CIH tractors, & Sprayers. Now with a built-in side light for extra light to the sides. Replaces CIH part #87309029 & 87309030, 87455675 & 87455674. Note: If used on a Steiger rowtrac, you might have to adjust the placement of the hydraulic lines.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
Combo beam/Hi-Lo or Flood beam light for Gleaner Rx2 series of combines. R42/52/62/72 early models and lower cab lights on all C / Rx2 using the 1.5" ball mount system. Please verify the serial number below in the fitments guide.
Headlight for the 9000 series CaseIH using 4 bolts to hold the light. Can also be used on some Gleaner combines for the un-load auger light. Now adjustable aim.
60 watt 4x6 size LED flood beam , fits many tractors using a standard 4x6 inch sealed beam flood light. This is an updated lens, the light beam is projected down towards the ground, instead of up in the air.
Headlight for some Agco tractors using 3 bolts to hold the light. Spacing between the 2 mounting holes is 5". Please verify your tractor use the 3 hole system before ordering.
LED-6060 is an oval LED light for CIH combines and some JD tractors. Select from Hi-Lo beam or Flood beam. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600. Effective Output: Low beam 2700 lumen, high beam / flood beam 5400 lumen.
An oval LED-652 Hi-Lo or Flood LED light for some JD tractors and CaseIH combines. The Hi-Lo model fits in the hood on many newer JD tractors, and both the Hi-Lo and the Flood light fit some newer CIH combines. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600.
Plug & Play flush mount, 3x5 LED Light. Direct replacement. Cast aluminum body. Uses original mounting hardware.
Replaces OEM Part Numbers: MacDon: 109696, 109112.
Plug & Play flush mount, 4x6 LED Headlight, Hi/Lo Beam. Direct replacement. Cast aluminum body. Uses original mounting hardware.
Replaces OEM Part Numbers: MacDon 110268. John Deere: AFH208686.
LED Headlights for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware.
Replaces Kubota Part Number: V1311-535210 (Left), V1311-535220 (Right)
LED-409 / LED-410 - a 40 watt, 15° or 40° beam LED light for the center grill lights on newer JD & CaseIH tractors and more. 3 used for the MX / Magnum, and 6 for the large STX models. John Deere OEM Part Numbers: AL209455. Challenger OEM Part Numbers: 519438D1, 526701D1. CASE / IH OEM Part Numbers: 87539115, 87328621. Will bolt into CIH OEM light housing part #: 87455676, 87455677, 87308895.
LED-4060 can be ordered as flood or spot beam, and is used for the 20 and 30 series JD tractors and other machines. Replaces John Deere Part Numbers: RE271574, RE181282, RE180613, RE271573. Replaces Buhler/Versatile Part Numbers: 86034865, 86034864, 86038024.
LED Hood Conversion Kit, LED-2755. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model. Note: This product will only work with tractors with an existing front headlight/light bar in the hood.
LED Hood Conversion Kit for JD 4050,4250 and 4450. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED Hood Conversion Kit, LED-3010. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model. Note: This product does NOT work with tractors with an existing front headlight/light bar in the hood. Use the LED-2755 instead.
LED Hood Conversion Kit, LED-4000. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model. For JD 4650 & JD 4850
LED Hood Conversion Kit, LED-4200. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED Hood Conversion Kit, LED-4600. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED-9652 Hi-Lo, LED Oval Headlight fits into the hood of John Deere Tractors. Uses OEM Mount and Wiring, Plug and Play. Replaces John Deere Part Number: RE181963, RE181964, RE205360
LED Headlight for Maxxum Tractors and more. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 1964881C1 & 1964881C2
LED-1206 - Large center light for CIH using the single center light (some STX models use 2) If you are replacing OEM HID lights, you need to add adapter wire LL0591.
LED-5602 - 60 watt Hi-Lo for JD tractors and more. Ships with pins installed on the wires, and 3 different connectors for different applications. John Deere part # AL174332 (RHT) AL174344 (LHT), AL204952 (LHT), AL204951 (RHT).
This is the large high beam light in the grill (the center light of the 3 lights on each side) on the newer models of JD "R" series tractors. Includes rubber grommet.
LED-750 for Bobcat Skid Steer LED Headlight, Plug & Play LED Light. Fits into original housing. Sold as a pair of right and left lights. Replaces OEM Part Numbers:
Bobcat: 7251341 (Left), 7251340 (Right).
TBL7 - Bracket for Gleaner combine lights, this bracket makes it possible to mount the LED-2388 light into the support bracket on some Gleaner combines.
TBL7 - Bracket for Gleaner combine lights, this bracket makes it possible to mount the LED-2388 Hi-Lo light into the support bracket on some Gleaner combines. The adapter wire converts the 3 wire light to the 2 wire Gleaner harness.
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
