Larsen LED for Steiger

Steiger  LED kit light kits.

 

There are several LED kits for the Steiger tractors, most of them will lower the amp draw on the electrical system. Option 3 & 4, however, use more amp than the OEM wires can handle, you will need to run a new 12 gauge wire to feed the lights.

All the kits will greatly improve the light output as the LED lumen is 2-4 times higher than the OEM halogen lights. 

Some of the kits have Round 5.5“ headlights included, some use the rectangular LED-4x6 Hi-Lo or 5x7" sealed beam replacement light in the grill, please make sure to order accordingly. 

Note : Some tractors using the 5.5" round grill lights has an enclosed light housing, this will have to be cut out some for the LED lights to fit.

Option 1 - LED kit for tractors with round grill lights, and rectangular work lights on the fenders. 
Included: 4 x LED-36 5.5“ sealed beam lenses, 4 x LED-845-2 for the rear fenders and 2 x LED-845-2 for the front fenders.

Option 2 - LED kit for tractors with rectangular grill lights, and rectangular work lights on the fenders.
Included: 2 x LED-4x6 hi-lo for grill hi-lo lights, 4 x LED-845-2 for the rear fenders and 2 x LED-845-2 for the front fenders.

Option 3 - LED kit for tractors with round grill lights, and round work lights on the fenders. 
Included: 4 x LED-36 5.5“ sealed beam lenses or 2 x LED-5x7 Headlights, 4 x LED-70 flood for the rear fenders and 2 x LED-70 Combo beam for the front fenders. 

Option 4 - High power LED kit, you will need to run a new fused wire feed to the lights, the OEM wires can not handle the amp load needed. 
Included: 4 x LED-90 floodlights for the rear fender, 2 x LED-80 for the front fenders, choose round or rectangular headlights.

Lights used in this kit:     LED-80    LED-90    LED-70 Combo beam     LED-70 Flood     LED 5x7     LED-845     LED-845-2      LED-36    LED-36B

View as Grid List
Sort by

Steiger Tractors Option 1

Option 1 - LED kit for tractors with round grill lights, and rectangular work lights on the fenders. Included : 4 x LED-36 5.5“ sealed beam lenses, 4 x LED-845-2 for the rear fenders and 2 x LED-845-2 for the front fenders.
$422.00

Steiger Tractors Option 2

Option 2 - LED kit for tractors with rectangular grill lights, and rectangular work lights on the fenders. Included : 2 x LED-5x7 hi-lo for grill hi-lo lights, 4 x LED-845-2 for the rear fenders and 2 x LED-845-2 for the front fenders.
$342.00

Steiger Tractors Option 3 with 5 3/4" headlights

Option 3 - LED kit for tractors with round grill lights, and round work lights on the fenders. Included : 4 x LED-36 5.5“ sealed beam lenses, 4 x LED-70 flood for the rear fenders and 2 x LED-70 combo beam for the front fenders. No connectors included on the LED-70 lights.
$686.00

Steiger Tractors Option 3 with 5x7 headlights

Option 4 - LED kit for tractors with 5" x 7" grill lights, and round work lights on the fenders. Included : LED-5x7 sealed beam lenses, 4 x LED-70 flood for the rear fenders and 2 x LED-70 combo beam for the front fenders. No connectors included on the LED-70 lights.
$606.00

Steiger Tractors Option 4

Option 5 - High power LED kit, you will need to run a new fused wire feed to the lights, the OEM wires can not handle the amp load needed. Included : 4 x LED-90 flood lights for the rear fender, 2 x LED-80 for the front fenders, choose round or rectangular headlights.
$524.00

LED-8606 Flood

60 watt 4x6 size LED flood beam , fits many tractors using a standard 4x6 inch sealed beam flood light. No brackets included.
$65.00

LED-8606 / 8608 / 8610 Hi-Lo

60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$65.00

LED-70 60° Flood

70 watt of CREE power ! 60° degree flood light.
$105.00 $89.00

LED-70 Combo beam

70 watt of CREE power ! Combo Beam, 4 flood LED's and 3 spot LED's
$105.00 $89.00

CaseIH 9000 series Headlight

Headlight for the 9000 series CaseIH using 4 bolts to hold the light.
$69.00

LED-745, 4 x 6 Hi-Lo (AAL-745)

A 4x6 HI-Lo, 45 watt LED Light, bracket can be removed so the light can be used as a sealed beam replacement light. Not DOT approved.
$42.00

LED-36A / PAR-46, 5 3/4" Sealed beam replacement, Driving beam

Replacement for 5 3/4" round sealed beam lenses. H4 connector. Single beam only.
$35.00

LED-36B / Par-46, 5 3/4" Hi-Lo beam / Sealed beam replacement

5 3/4" Hi-Lo sealed beam lens replacement, H4 connector. Can be used free standing with included bracket, or as a drop-in replacement.
$41.00

LED-5x7 replacement lens, 45 watt, Hi-Lo

Replacement for 5x7 sealed beam lens. H4 connector. Off road use only, not DOT approved. OEM # H6054
$36.00

LED-660 Series LED lights

LED-660 is a 4x6 style LED work light. 6 CREE LED's at 10 watt each, 4100 lumen, 5000k and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application.
$77.00

LED-666 Oval LED Light

The LED-666 Series of lights are all 60 watt CREE LED lights. The light can be ordered as a side mount or a bottom mount light, 25, 40, 60 or 80 degree beam pattern. Integrated Deutsch connector, and included is an adaptor cable for 880 series and 9005 bulb connectors.
$77.00

LED-845

4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$45.00

LED-845-2

4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output. Standard bracket.
$45.00

LED-0092, LED Red Oval Tail Light.

LED Tail Light for John Deere Tractors. Plug & Play. OEM Replacement: John Deere: AR78825, RE39223
$29.00

LED-0091, Amber Cab Light, AR60250 / Flasher for JD 30/40/50/55/60 series

This model fits Sound Guard Cabs, and 4wd Steiger. Includes Stainless Steel Hardware.
$29.00

Electronic LED flasher relay

If you replace your stock flashers with LED flashers, you might need a new flasher relay or a set of resistors in order for the flashers to flash normally.
$12.50

Resistor, set of 2

If you replace your stock flashers with LED flashers, you might need a set of resistors or a LED flasher relay in order for the flashers to flash normally.
$10.00
Newsletter