Larsen LED PAR-36 kit for JD 4x50 series tractors. 6 or 8 x PAR-36 lights included, and the front nose cone can be added. Total up to 29600 lumens (max) if the brightest lights are used. Note: The 40 watt PAR-36 will only fit if your tractor has housings with a rubber grommet holding the light, - it will not work with the all in one plastic housings.
Larsen LED GOLD kit for JD 4x50. This kit is a complete light replacement kit - 8 x LED-408U lights included and an LED-3000 kit for the front nose cone. The LED-408U is a 3200 lumen light. Badly rusted housings on the tractor? No problem - this kit replaces it all. Note: The lights do not include connectors, you will have to use your own or splice the wires.
2 Hi-Lo and 2 40° lights for the front grill lights, 2 flood and 2 40° for the top roof lights & 4 flood for the rear fender lights. 12 lights total. This is the gold kit - all lights are the 3200 lumen LED-408. Note: This is a complete light replacement kit, the lights looks like the OEM lights, but are complete LED lights.
12 x 40 watt Par-36 LED bulbs included in this kit, changes all lights to LED using the existing housings. 2800 lumen/bulb (max). Note: The 40 watt PAR-36 will only fit if your tractor has housings with a rubber grommet holding the light, - it will not work with the all in one plastic housings.
8 x 30 watt, 1700 lumen Par-36 LED bulbs included in this kit and 4 LED-845 (2800 lumen 4x6) for the rear fender. This will change all front grill lights to Par-36 LED bulbs and the 2 roof lights also to Par-36 LED, and the LED-845 is replacing the 4 rear fender lights.
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.
High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size housings with rubber grommets due to large cooling fins. Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.
PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.
The LED-408U is a complete LED light that can replace OEM PAR-36 style lights. It includes hardware for all 3 locations on a JD SG cab, in front fenders, top of rear fender, and top rear cab. 3200 lumen vs. the OEM lights at 600 lumens. This light uses 3D reflector cups for the best light output.
LED Hood Conversion Kit for JD 4050,4250 and 4450. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED Hood Conversion Kit, LED-4000. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model. For JD 4650 & JD 4850
LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.
A Round 40-watt CREE LED light. Works as a replacement for Par-36 style lights. Fantastic light output!. 60° Flood beam. Price is for one light only, the 2 lights show the 2 style rubber grommets that are included. This model 408 is the one that looks most like the old halogen.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.