LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
Search
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0070
A Round 40-watt CREE LED light. Works as a replacement for Par-36 style lights. Fantastic light output!. 60° Flood beam. Price is for one light only, the 2 lights show the 2 style rubber grommets that are included. This model 408 is the one that looks most like the old halogen.
$54.00
LL0325
LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.
$33.00
LL0315
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 20° Spot Beam.
$15.00
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$33.00
R94516
Used in hi-lo brake & clutch assembly and PTO clutch. Sold individually, order quantity required.
$34.02
888215
Expansion Valve, Right Angle, Externally Equalized
$31.58
1902929M91N
Three wire system w/ R-terminal.
$157.63
R50156A
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Quality checked and set to OE specifications in Humboldt, Iowa by a Hy-Capacity Technician.
Includes: (4) ##HR95827## Friction Discs
$1,179.28
888301334
Utilizes OEM original length compressor hoses & incorporates high/low side switch protection. Includes: • ##883782613## Compressor • (2) ##88965170## Pressure Switch Valve Adapters • ##888301284## Low Voltage Clutch Coil Protection Kit • ##888301759## Dual High & Low Pressure Switch Kit • O-Rings • Mounting Bracket & Hardware
$588.55
CR30CK
One piece Cowl Kit w/ a preformed plastic base & perforated vinyl lining. Digitally cut for an exact fit. Easy installation!
See this cowl kit installed on a John Deere 4640 on our blog!
$184.60
881126
Capillary tube measures 36. Cold On = 33 degrees. Cold Off = 26 degrees.
$42.11
888301731
Compressor includes a dust cover. Includes: • ##88295061## (Aftermarket Nippondenso 6E171 Compressor) • ##8890118## (Receiver Drier) • ##888215## (Expansion Valve) • O-Rings
$510.59
HR206778 KIT
Includes:
- ##HR206778## Pioneer Hydraulic Cartridge Coupler Conversion Kit
- (2) ##HR94522## Male Coupler Tips
Eliminate the need for adapters for your John Deere 4000 Series tractor. Converts John Deere remote couplers to ISO 5675 style tips. No need to adapt implements using the ISO male tips to the old style John Deere coupling interface. This kit contains all of the components to convert two original John Deere couplings.
- Easy push/pull operation
- Reduced pressure drop for longer system life
- Simple and fast installation
- All steel components, plated for excellent corrosion resistance
- Male tips have hardened locking ball grooves to resist wear and provide protection from brinelling
- Positive valve stop prevents flow checking for smooth performance
Read more about this hydraulic coupler kit on our John Deere 40 series blog post!
$188.64
HCTIK17892HC
This Overhaul Kit contains Pistons made of hypereutectic aluminum alloy, which makes the piston inherently stronger. It is also more resistant to expansion and contraction, as well as scuff and corrosion resistant. Efficiency improves due to a better seal between the rings and cylinder wall.
Includes:
- (6) ##HCTAR63272HC## Cylinder Kits
- (6) ##HCTAR45723## Rod Bearings
- (6) ##HCTAR74814## Main Bearings
- (1) ##HCTAR77747## Thrust Washer Set
- (1) ##HCTAR77748## Thrust Bearing
- (1) ##HCTAR63270## Head Gasket Set
- (1) ##HCTR71918## Oil Pan Gasket
- (12) ##HCTR66452## Connecting Rod Bolts
$1,821.14
HR94522
This male tip from Pioneer is manufactured to meet original OE dimensional specifications. It has a slightly smaller hex size than a standard Pioneer tip.
- Induction hardened ball locking groove to prevent brinelling and increase life
- Shielded valve and valve stop eliminates flow checking
- Leak-free poppet valve design
- Protective zinc plating with clear trivalent chromate finish
$15.81
8890118
Inline Receiver Drier.
This Inline Receiver Drier is featured in our blog post, "Make Spraying Season Successful: Spring Maintenance for Sprayers." Read it here.
$40.94
888215BT
Expansion Valve, Right Angle, Externally Equalized
$32.40
88AR89913
Heater Control Valve, Manual Rotary, 5/8" Hose
$50.18
SR8301995
Was your machine originally equipped with a hydraulic suspension? If so, this is the Seat you are looking for. Ergonomically contoured Seat has a compact air suspension that is engineered with a swivel, tilt & fore/aft adjustment. Base plate included for multiple bolt hole patterns. Some minor drilling may be required.
Bolt Specs: 0.314" x 0.787", w/ 1.25" Pitch Thread, Nut (Spacer) Specs: 7/16"
$1,374.03
R94659N
8 piston, 19 GPM, non-serialized pump. Built using all new components. Pressure set to OEM specifications & flow tested at operating temperature in our Iowa facility.
Everyone knows how important hydraulics are. Read our blog post, "What Makes Hy-Capacity Hydraulic Pumps so Great?" here.
$1,172.54
HR85559
Our product is made from high quality ozone resistant materials.
$34.02
888301327
Includes dust cover. Does not include superheat switch.
$597.48
R46391
Sold individually, order quantity required.
$23.63
R17162
Made in the USA of high quality materials. Sold individually, order quantity required.
$45.34
R43724G
Includes: Exhaust Sleeve & (2) ##702299## Exhaust Sealing Ring Sets
$93.91
R94661N
8 piston, 24 GPM, built using all new components. Pressure set to OEM specifications & flow tested at operating temperature in our Iowa facility.
Everyone knows how important hydraulics are. Read our blog post, "What Makes Hy-Capacity Hydraulic Pumps so Great?" here.
$1,302.96
R93448
Alternator - New, 12V, 90A, Aftermarket Nippondenso
$248.35
888302130
Installs between A6 & Sanden GM pad fittings & hose ends. Adds binary hi-side switch protection to the discharge circuit.
Includes: ##8811100## (Binary Switch), ##88965170## (Adapter), ##881181## (Pigtail Connector), Spacer + Bolts, ##R60171## (Plate), ##88415## (A6 O-Rings) & Sanden Pad O-Rings
$93.91
CR30CC
One piece Cowl Cover made of high quality materials & digitally cut for an exact fit. Includes 3M Spray Adhesive, ##C830511##.
See this cowl cover installed on a John Deere 4640 on our blog!
$77.06
SR44700BU
Hy-Capacity’s Cab Interior products will help increase the value of your equipment & enhance the overall appearance. Our vinyl Seat Cushions are very durable & easy to clean.
Includes: Seat Cushion, Back Cushion, Upper Back Cushion, & Complete Bracket Kit ##SR830732##
$296.32
HCTAR77750
Tab is centered on bearing.
$18.20
888301442
High Pressure Switch, Closed, 190-375 PSI
$50.18
CR40E KIT1
SAVE & buy as a kit! Includes: ##CR40E##(Cab Kit), ##CR40P##(Cab Post Kit), ##CR40H##(Headliner), ##CR30CC## Cowl Cover, ##CR40KPS##(Kick Panel Set) & ##CR30FM##(Floor Mat)
$776.97
HCTRG17892
Includes:
• (6) ##HCTAR63272## Cylinder Kits
• (6) ##HCTAR45723## Rod Bearings
• (6) ##HCTAR74814## Main Bearings
• (1) ##HCTAR77748## Thrust Bearing
• (1) ##HCTAR77747## Thrust Washer Set
• (1) ##HCTAR63269## Overhaul Gasket Set
• (1) Front Crank Seal
• (6) ##HCTR42173## Piston Pin Bushings
• (1) Rear Crank Seal
• (4) ##HCTR46903## Cam Bushings
• (12) ##HCTR66452## Connecting Rod Bolts
$1,970.20
881280495
Male Quick Disconnect Coupling, #12 (1-1/16")
$66.40
CR91035
Keep dirt and debris from clogging your radiator with our high quality Radiator Cushion Foam Kits. They seal the gap between the radiator and grille while airflow passes through the core for better cooling. Not to mention it acts a cushion between the raditor and metal components to prevent damage during operation.
$50.18
88295061
Includes dust cover. If replacement manifolds are required order Manifold Kit ##888302306##, on models equipped with original Denso compressor. If this system has been flushed, add an additional 5oz of PAG 46 to the Receiver Drier. If system has not been flushed, add 3oz of PAG 46 to the Receiver Drier.
$450.37
888301333
Includes: • ##883782613## Compressor • ##888301284## Low Voltage Switch • ##888301232## High-Low Binary Pressure Switch Kit • Mounting Bracket & Hardware
This compressor conversion kit is featured in our blog post, "Air Conditioning Tech Tips for Farm Equipment." Read it here.
$588.55
8810927
Includes dust cover.
If Replacement Manifolds are required on models equipped with original Denso Compressor, order Manifold Kit ##888302306##.
$386.96
88AR61885
OEM replacement Condenser. Highly durable, robust steel tube & aluminum fin construction. Helium leak tested. Inline tube pattern & fin design to minimize clogging on the air side. Oil cooler circuit is turbulated for additional performance.
$484.12
R58756N
Schweitzer replacement
Includes: Mounting Gasket
$557.00
HCTRG17892HC
This Overhaul Kit contains Pistons made of hypereutectic aluminum alloy, which makes the piston inherently stronger. It is also more resistant to expansion and contraction, as well as scuff and corrosion resistant. Efficiency improves due to a better seal between the rings and cylinder wall.
Includes:
- (6) ##HCTAR63272HC## Cylinder Kits
- (6) ##HCTAR45723## Rod Bearings
- (6) ##HCTAR74814## Main Bearings
- (1) ##HCTAR77747## Thrust Washer Set
- (1) ##HCTAR77748## Thrust Bearing
- (1) ##HCTAR63269## Overhaul Gasket Set
- (1) ##HCNAR49025## Front Crank Seal
- (1) ##HCNRE520036## Rear Crank Seal
- (6) ##HCTR42173## Piston Pin Bushings
- (4) ##HCTR46903## Cam Bushings
- (12) ##HCTR66452## Connecting Rod Bolts
$1,951.56
R94658N
8 piston, 19 GPM, serialized pump. Pressure set to OEM specifications & flow tested at operating temperature in our Iowa facility.
Everyone knows how important hydraulics are. Read our blog post, "What Makes Hy-Capacity Hydraulic Pumps so Great?" here.
$1,172.54
881280492
Female Quick Disconnect Coupling, #12 (1-1/16")
$68.92
888301730
Metric thread. Includes: • ##8810423## (Genuine Delco A6 Compressor) • ##8890118## (Receiver Drier) • ##888215## (Expansion Valve) & O-Rings
$842.76
HCWBK-JD-7
2WD machines. Inner Bearing (race I.D. 1.796"), Outer Bearing (race I.D. 1.313").
Includes: Inner Bearing Cone & Cup, Outer Bearing Cone & Cup, Seal & Sleeve
$51.79
HR95827
These are for John Deere Perma Clutch. Friction surface OD of 12" & ID of 7". Spline count of 48 w/ spline OD of 6-3/16".
$92.30
HCTIK17892
Includes:
• (6) ##HCTAR63272## Cylinder Kits
• (6) ##HCTAR45723## Rod Bearings
• (6) ##HCTAR74814## Main Bearings
• (1) ##HCTAR77748## Thrust Bearing
• (1) ##HCTAR77747## Thrust Washer Set
• (1) ##HCTAR63270## Head Gasket Set
• (1) ##HCTR71918## Oil Pan Gasket
• (12) ##HCTR66452## Connecting Rod Bolts
$1,794.87
SR8301439
This high quality Sears Mid-Back Seat for John Deere 30 Early Series Tractors with Sound-Gard cab features durable brown fabric, a reclining back & fold-up armrests. Equipped with a narrow/compact air suspension, fore/aft adjustment to absorb jolts, swivel & tilt to allow for maximum comfort in the field or on the road. Mounting brackets & hardware are included.
Some minor drilling may be required.
$1,522.12
ECA1000
Ignition activated, w/ 10A power transistior & w/o brush holder. Fits 10SI, 12SI, 15SI & 27SI Delco Alternators.
$10.96
888301759
High-Low Switch Kit for Delco A6 & Sanden GM pad.
Includes: ##888301442## Hi Pressure Switch, ##888301443## Lo Pressure Switch, 2 Valve Adapters and Spacer (One or Two Piece)
$124.68
HCAR81954
2WD machines. This spindle has the update 3/4" X 10 thread on the steering arm side. Use ##HCWBK-JD-8## Wheel Bearing Kit.
$283.36
R50156B
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Quality checked and set to OE specifications in Humboldt, Iowa by a Hy-Capacity Technician.
Includes: (4) ##HR95827## Friction Discs
$1,179.28
HR8301352
Includes: (4) ##HR86535## Selective Control Valves w/ Teflon Seat & SCV Overhaul Kit
$275.27
8302231
For 1st, 2nd, 3rd & 4th planetary brakes.
Includes: (9) ##R17162## Friction Discs, (4) ##R94516## Friction Discs, (5) ##R48236## Separator Plates, (4) ##R48235## Separator Plates, (3) Separator Plates, (1) Separator Plate & Piston Seals
$1,571.50
HCTAR77752
Tab is centered on bearing.
$19.35
CR40EEZ
New design is repositionable for a perfect fit the first time. Just snaps in place for an easy installation! Digitally cut for an exact fit. This kit is made for cabs w/ early serial numbers. Identify the serial number of your cab on the top of the door frame by the windshield wiper motor.
Includes: RH & LH Fender, RH & LH Seat Pan, Rear Sill for Under Rear Window, RH & LH Rear Upper, LH Rear Lower, Under Seat, (2)ROPS Filler
See this cab kit installed on a John Deere 4640 on our blog!
This EZ cab kit is featured in our blog, "Increase Equipment Value with All-New, Easy to Install Cab Interior." Check it out here!
$390.11