NextLED-4013

Resistor, set of 2

If you replace your stock flashers with LED flashers, you might need a set of resistors or a LED flasher relay in order for the flashers to flash normally. If possible use the LED flasher relay instead of the resistors. Find it further down on this page.

SKU: LL0464

Availability:

26 in stock

$10.00

Qty:

+ -

Notes:

All prices are USD. If imported into Canada/Internationally there will be brokerage costs collected by the carrier. Check the"Canada/World" link at the top of the page for more info. Please note that Hy-Capacity items can not be shipped to Canada / International.

Overview

50w Resistor set.

Use if no flash after replacing the OEM flashers with LED flashers. Install in-line, one on the right side flasher and one on the left side flasher.

This will increase the load on the flasher relay and it will work as normal.

Most of the time you do not need one for each light - one for each side is enough. Install onto metal for better heat disposal (they get HOT after long time use)

50w Resistor set.

Use if no flash after replacing the OEM flashers with LED flashers. Install in-line, one on the right side flasher and one on the left side flasher.

This will increase the load on the flasher relay and it will work as normal.

Most of the time you do not need one for each light - one for each side is enough. Install onto metal for better heat disposal (they get HOT after long time use)

Write your own review

Review title: *

Review text: *

Rating:

Bad
Rating 1 Rating 2 Rating 3 Rating 4 Rating 5
Excellent

Customers who bought this item also bought

LED-486, Round Amber / Amber LED light

LL0328

LED-486, Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.

$36.00

Electronic LED flasher relay

LL0466

If you replace your stock flashers with LED flashers, you might need a new flasher relay or a set of resistors in order for the flashers to flash normally.

$14.50

LED-92, LED Red Oval Tail Light.

LL0325

LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.

$33.00