Show All Products
11443576
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat price includes link welded onto each end. Pack of 1
$700.67
11443890
Hardware kit for use when replacing stainless steel feather sheets. Pack of 1
$29.86
11450964
Hardware kit for use when replacing stainless steel feather sheets. Pack of 1
$43.21
11453730
Yetter injector conversion kit, includes injector rod, hardware, and shims. Converts 2995 fertilizer coulters to injections style fertilizer.** does not come with fertilizer tip. Pack of 1
$102.44
11449060
Finger guide only for JD 900 series OEM Poly finger. Pack of 1
$4.49
11448173
Flange bolt used to mount lower boot to upper boot on John Deere grain drills 1560, 1860. Includes Lock Nut. Pack of 1
$1.62
11979132
Pair of sealed flanges for 1 1/8” and 1 3/16” BSA series. Pack of 1
$5.86
11433502
Pair of greasable flanges for 209 series bearings. Pack of 1
$12.70
11456928
Relube disc harrow bearing, riveted flange style, 1-3/4" round bore. Fits rear gang on Brent CPC and Earthquake™ rippers; late models with 4-bolt riveted flange. Great Plains Verti-Till models 4360A, 5300A, 6360A, 7225A, 7300A, 9225A. Krause-Kuhn ripper models 1740-1767, 2400-2495, 4995, 5812-5824. Also fits select models of Krause-Kuhn and International Harvester discs.Bolt Holes are for 1/2" bolts. Outside measurement of the flange is 5 1/2".Replaces a Fafnir no. DHU1-3/4R211. Pack of 1
$51.33
11455924
Flat, double bevel blade with small pilot hole. Can be cut to most hole patterns. Pack of 1
$37.86
11446687
Fits Hiniker, Buffalo, Krause, and Wetherell - Flat Point. Pack of 1
$34.44
11985012
Auger floor liner kit for all 1600 series. (Except 1620). Pack of 1
$368.84
11450078
Ford "General Purpose" bottom, 14" 4 bolt plow share. Will also work on plows that only use 3 bolts. **Sold 6 per box with the hardwareMade in the USA by Wiese Industries. Pack of 1
$35.66
11444473
Ford "General Purpose" bottom, 16" 4 bolt plow share.**Sold 6 per box with the hardware. Made in the USA by Wiese Industries. Pack of 1
$37.84
11448276
Reversible Formed ear point for IH #11. 3/4" x 2-1/2" x 12" . Also fits M & W Earthmaster. Pack of 1
$36.29
11445776
Floater wheel kit for Yetter row cleaners. 2 required per row. Comes with hardware.Sold and priced each. Pack of 1
$58.69
11453843
Frog only for CFC 3 pc sweep assembly. Does not include hardware. Pack of 1
$29.46
11450570
Righthand frog, bolts to the chisel shank. Moldboard and point bolt to this unit to hold them on the shank. Pack of 1
$28.69
11422823
Front swept Narrow Profile knife with chrome insert for longer wear and single 1/2" closed and drilled tube.Universal punching fits most side-mount applicator shanks, including DMI, Blu-Jet, etc. Pack of 1
$51.74
11446553
Front swept Narrow Profile knife with chrome insert for longer wear and single 3/8" closed and drilled tube.Universal punching fits most side-mount applicator shanks, including DMI, Blu-Jet, etc. Pack of 1
$47.54
11347565
Front swept Shield Ag knife with Chrome insert and 1/2" tube. This knife sweeps forward more than the Super Sealer knife does. Pack of 1
$66.78
11441080
Left hand frog, bolts to the chisel shank. Moldboard and point bolt to this unit to hold them on the shank. Pack of 1
$25.62
11444774
Front swept knife with Chrome insert, chrome tube protector, and 3/8” closed and drilled stainless steel tube. This knife has more forward sweep than most mole style knives for better sealing and wear properties. Pack of 1
$61.02
11443080
Front swept Super knife with extra heavy chrome insert for longer wearand 1/2" O.D.tube. Pack of 1
$58.61
11453633
Front swept Super knife with extra heavy chrome insert for longer wear and 3/8" closed and drilled tube.Universal punching fits most side-mount applicator shanks, including DMI, Blu-Jet, etc. Pack of 1
$56.87
11449793
Front swept universal coulter knife and 1/2" stainless steel tube. Typically used with liquid applications. Pack of 1
$29.20
11970173
Front Wear Pad, thick. (24351, 24337). Pack of 1
$3.29
11452644
Replaceable nylon wear pads offer 3-4 times the life to the hold downs. This wear pad is used on hold down numbers 25615, 25454, 25453. This is considered a medium thickness hold down.Replaces Crary number 12848-00. Pack of 1
$3.29
11450246
Poly wear strip to repair damaged snouts. Fits JD 90 series with serial number prior to 695300. Kit includes 1 RH and 1 LH poly strip and mounting hardware. Pack of 1
$26.62
11459409
Gauge wheel assembly for MaxEmergePlus, Pro series, 1530, 1535. Also use to retrofit on MaxEmerge2 1992 and after. Nylon/Steel rim assembly with groove style bearing.White 6000 series planters. Pack of 1
$96.19
11459813
These disc arbors are commonly used on Case-IH, John Deere, White, Kewanna, and other disc harrows with 1-1/8" square shafts. Pack of 1
$126.99
11330690
These disc arbors are commonly used on Case-IH, John Deere, White, Kewanna, and other disc harrows with 1-1/8" square shafts. Pack of 1
$128.98
11453433
These disc arbors are commonly used on Case-IH, John Deere, White, Kewanna, and other disc harrows with 1-1/8" square shafts. Pack of 1
$124.02
11438302
Gathering chain with chrome pins and solid rollers for longer wear. FitsRoto-Disc 30" through 40" rows; NorthStar 30" through 40" rows; MS Cornstar 30" through 40" rows. 76 links with 9 lugs, endless, has chrome pins. CA627-9ATT-76. Pack of 1
$70.67
11977549
Gathering chain, Roto-Disc 20” & 22” rows; NorthStar 20” & 22” rows; MS Cornstar 20” & 22” rows; PC 28” thru 38”. 72 links with 9 lugs, endless, has chrome pins. Replaces Geringhoff no. 034860. Pack of 1
$70.67
11459208
Gathering chain with hardened chrome pins and solid rollers. Fits John Deere 600C corn heads to s/n 745100. Pack of 1
$69.26
11447294
CA555-C48-C6E-8. (endless chain) This chain has chrome pins and solid rollers for better wear. Excellent quality, fits many different cornheads. 8 lugs per chain.Case-IH fits all 800, 900, 1000, 2200 series ; 3200 & 3400 thru 2010.John Deere fits all 40 and 90 series.New Holland fits all 974 series; 996, 96C, 98C; 98D thru 2010.CA555C6EJK 63.5. Pack of 1
$46.98
11427401
Gathering chain, fits Massey Ferguson 24, 33, 34, 43, 44, 62, 63, 64, 82, 83 and all 1100 series cornheads. CA2060H-64-C6E-8. Pack of 1
$57.05
11459404
Gathering chain with chrome pins, fits models 606C, 608C, 612C, 612FC, 616C, 618C s/n 745101 & up. Pack of 1
$46.19
11454532
Drive Sprocket, heat treated, 8 tooth, fits John Deere 40 & 90 series. Pack of 1
$21.28
11457612
Upper drive sprocket for gathering chain, splined, heat treated.Fits Case-IH corn heads 2200, 2400; 3200 to s/n YCS023090, 3400 to s/n YCS039041.New Holland 98D prior to 2013 with knife snapping rolls (confirm 7 tooth). Pack of 1
$24.42
11441293
Upper drive sprocket for gathering chain, 8-tooth.Used on John Deere 606C, 608C, 612C corn heads to s/n 745100. Pack of 1
$40.13
11449345
Drive sprocket for gathering chain on Case-IH 900 and 1000 series. Pack of 1
$22.10
11443494
Upper Drive Sprocket, 8 tooth, heat treated.Fits AGCO Gleaner Hugger, 3000 series 30" rows & wider;Challenger CH series corn heads 30" rows & wider. Pack of 1
$21.85
11456315
Gathering chain with hardened chrome pins. 56 links, 7 lugs, endless.Fits Drago Legacy, Series I, Series II corn heads; all row widths except 20". Pack of 1
$76.20
11457815
Gathering chain guide for 90 series heads, cast. Pack of 1
$32.31
11453728
Lower idler sprocket for gathering chain. Fits John Deere 600 cornheads prior to s/n 745100. Pack of 1
$40.13
11450245
Lower Idler sprocket, 8 tooth, 5/8" bore. Fits all black heads '77 to '89.New Idea:800 & 6500 series. Pack of 1
$17.62
11445886
Poly paddles extend the length of existing cornhead gathering chain paddles to help feed in down corn and hard to feed corn.Chain paddle kit - 2 rows. Kit includes 32 paddles, hardware, and instructions. ** For John Deere 40 & 90 series only. Pack of 1
$82.59
11422815
Gathering chain with chrome pins and solid rollers for longer wear, fits '77 to '89 "black head" adjustable models. Sold with a connector link.Industry chain number CA550-C57-C17E-7.550 chain, 57 links, 7 paddles. Pack of 1
$80.01
11447270
Gathering chain with chrome pins, solid rollers, 76 links, 6 lugs, and endless. FitsRoto-Disc 30" through 40" rows; NorthStar 30" through 40" rows; MS Cornstar 30" through 40" rows. Pack of 1
$85.67
11459430
Depthshaft arm.Used on drills and air seeders 1560, 1590, 1690, 1835, 1860, 1890, 1895, 1990. Pack of 1
$40.49
11457111
Gauge Wheel Arm kit for Kinze 2000 series planters. Has thread hole at the bottom to attach the gauge wheel. Has threaded bushing at the top for adjusting the gauge wheel to the seed disc opener. Pack of 1
$26.98
11446363
Gathering chain with chrome pins and solid rollers for longer wear, Fits AGCO Gleaner Hugger, 3000 series; Challenger. (3000 series and Challenger 30" rows and wider). 550 chain with 6 lugs.Industry number CA550-C50-C17E-6.This chain has chrome pins for longer wear. Pack of 1
$66.25
11454530
Gathering chain, fits 800 series.Industry number CA550-52-C12E-8. Pack of 1
$133.25
11456027
Gauge wheel arm kit complete with threaded bushings, and hardware. Fits JD 7000-7340 and all Max Emerge Plus. 2 bushings included one has a 1" I.D. hole (replaces JD no. A57057) the other has a 16 mm hole (replaces JD no. A57058). Painted green. Pack of 1
$27.09
11453943
Gauge wheel arm pivot shaft. Fits Kinze® 3000, 4000 series planter row units. Pack of 1
$15.85
11447271
Gauge wheel assembly for XP Planter row units and JD No-till drills, 4.5" x 16". Double Steel rim assembly with bearing and Nylon outer cover. Pack of 1
$157.25
11442884
Gauge wheel assembly. 4.5" x 16" standard profile tire with 40mm bearing (mounts with bolt). Nylon outer wheel half, steel inner.Case-IH 500, 500T Precision Disk Drill. Great Plains YP planters; 15, 25 series drills with 15" opener blades.John Deere drills and air seeders 750, 1560, 1590, 1690, 1835, 1850, 1860, 1890, 1895, 1990.Kinze® planters 1993 and after (black cover).Monosem late model Plus planters. New Holland P2080, P2085 Disk Drill. White 8000, 9000 planters. Pack of 1
$92.36
11457021
Complete Gauge Wheel Assembly, 4.5" x 16" for JD Max Emerge and Kinze planters built prior to 1993. Double steel rims with stem cross hole bearing and nylon outside cover. Pack of 1
$120.32
11445791
Gauge wheel assembly for MaxEmergePlus, Pro series, 1530, 1535. Also use to retrofit on MaxEmerge2 1992 and after. Double Steel rim assembly with groove style bearing and nylon outer cover. Pack of 1
$157.25
11450265
Gauge wheel assembly for XP row units, 4.5" x 16". Nylon/Steel rim assembly with bearing. For John Deere MaxEmergeXP, Pro-SeriesXP, MaxEmerge5, ExactEmerge; 1530, 1535 drills with MaxEmergeXP. Pack of 1
$77.18
11443200
Gauge wheel assembly for MaxEmergePlus, Pro series, 1530, 1535. Also use to retrofit on MaxEmerge2 1992 and after. Nylon/Steel rim assembly with groove style bearing and RID tire. Pack of 1
$140.47
11436578
4.5" x 16" offset chine RID (reduced inner diameter, CIH style)gauge wheel assembly with a 5/8" bore bearing. This is a nylon/steel assembly with many applications. Can be used on all Kinze planters 2000 and later, CIH SDX30 and SDX40 air seeders, CIH 1200 series planters, White 8000 series planters. Pack of 1
$140.47
11454544
4.5" x 16" gauge wheel tire with standard profile offset. Fits John Deere planters with MaxEmerge® , MaxEmerge® 2, MaxEmerge® Plus, and Pro row units. Fits John Deere grain drills 750, 1560, 1850, 1860; 1530, 1535 with MaxEmerge® Plus row units; early 1590, 1690, 1835, 1890, 1895, 1990. Fits Kinze planters. Fits White planter models 5100, 5700, 6000, 8000. Pack of 1
$81.84
11452347
Gauge wheel tire only for JD Grain Drills and John Deere planters with XP row units. Does NOT work on other planters. Pack of 1
$67.54
11451556
4.5" x 16" tire with reduced inner profile offset. Fits Case-IH 800, 900, 950, 955, 1200; 5400, 5500 Soybean Special; SDX30, SDX40 air seeders. New Holland SP280, SP380, SP480, SP580. John Deere MaxEmerge® , MaxEmerge® 2, MaxEmerge® Plus, Pro; 1530 and 1535 with MaxEmerge® Plus. Pack of 1
$35.73
11450561
Gauge wheel tire only, reduced inner profile to fit OEM XP gage wheel assemblies. Pack of 1
$64.73
11446280
Complete Gauge Wheel Assembly, 4.5" x 16" for JD Max Emerge and Kinze planters built prior to 1993. Nylon/Steel rims with stem cross hole bearing. Pack of 1
$140.47
11448666
Gauge wheel bearing; Case, IHC, Glencoe. 3 3/4 x 1-3/16".* Case row crop cultivator gauge wheels.* IH row crop cultivator gauge wheels.* Glencoe row crop cultivator gauge wheels. Pack of 1
$13.74
11459216
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat price includes link welded onto each end. Pack of 1
$626.95
11458118
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat price includes link welded onto each end. Pack of 1
$818.96
11458612
* Heavy duty links made of 5/16" heat treated high carbon steel.* Designed to be used on #67 sprockets.* Clean design prevents clogging or binding.* Longer wear life than steel or pintle chains due to 5/16" thickness.* Easily assembled or disassembled, twist link approximately 45 degrees.* Slat price includes link welded onto each end. Pack of 1
$955.49
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$5.95
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$79.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$26.00
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$36.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$27.45
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$33.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.50
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$37.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$99.90
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$259.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$69.50
Recently viewed products
