You have no items in your shopping cart.

LED-486, Round Amber / Red LED light

LED-486, Amber lens on one side and Red on the other. Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. The amber and red sides are powered separately, you can have the red on constant and only connect the amber to the signal wire. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.
SKU: LL0331
49 in stock
$36.00
+ -
Notes:

All prices are USD. If imported into Canada/Internationally there will be brokerage costs collected by the carrier. Check the"Canada/World" link at the top of the page for more info.  Please note that Hy-Capacity items can not be shipped to Canada / International.

LED-486, Round stud mounted warning light.  Amber / Red

Use this replacement double-sided LED Light to mount to the Top Fender on Allis Chalmers® tractors, or John Deere® tractors, combines, cotton pickers or windrowers, and for many other brands and models. The light is amber on one side, and red on the other side.

Use 8.5 W. An average turn signal bulb could be 10, 18 or 21 watts depending on the model.

The amber and red sides are powered separately, you can have the red on constant and only connect the amber to the signal wire.

Note- This light does not have a built-in flasher, they would require a flasher relay in order to flash.

OD is around 4.2" and mounted height is 4.75"

Amber, flasher, signal, LED0486, LED486, amber/red

LED-486, Round stud mounted warning light.  Amber / Red

Use this replacement double-sided LED Light to mount to the Top Fender on Allis Chalmers® tractors, or John Deere® tractors, combines, cotton pickers or windrowers, and for many other brands and models. The light is amber on one side, and red on the other side.

Use 8.5 W. An average turn signal bulb could be 10, 18 or 21 watts depending on the model.

The amber and red sides are powered separately, you can have the red on constant and only connect the amber to the signal wire.

Note- This light does not have a built-in flasher, they would require a flasher relay in order to flash.

OD is around 4.2" and mounted height is 4.75"

Amber, flasher, signal, LED0486, LED486, amber/red

Product tags
Write your own review
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
LL0328
LED-486, Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.
$36.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$16.00
LL0466
If you replace your stock flashers with LED flashers, you might need a new flasher relay or a set of resistors in order for the flashers to flash normally.
$14.50