Search

Included in 8302254 IPTO 540/1000 RPM Output Shaft Bearing KitThe HH287057 IPTO Needle Bearing fits equipment brands such as: Case IH, International

Heavy duty, three post connection, swing arm brush assembly. Includes debris shield.The 79004870N Alternator - New, 12V, 72A, 10SI, Aftermarket Delco Remy fits equipment brands such as: Allis Chalmers, Bobcat, Case, Case IH, Gleaner, International, John Deere, Massey Ferguson, Minneapolis Moline, New Holland, New Idea, Oliver, SpraCoupe, Versatile, White

Includes debris shield.The 89017575N Alternator - New, 12V, 105A, 10SI, Aftermarket Delco Remy fits equipment brands such as: Allis Chalmers, Bobcat, Case, Case IH, Gleaner, International, John Deere, Massey Ferguson, Minneapolis Moline, New Holland, New Idea, Oliver, SpraCoupe, Versatile, WhiteThe 89017575N is a substitute for the following discontinued products: 89017575NHD

Assembled in the USA with heavy duty bearings to extend life. Three post connection, swing arm brush assembly. Includes debris shield.The 79004870NHD Alternator - New, 12V, 72A, 10SI, Aftermarket Delco Remy fits equipment brands such as: Allis Chalmers, Bobcat, Case, Case IH, Gleaner, International, John Deere, Massey Ferguson, Minneapolis Moline, New Holland, New Idea, Oliver, SpraCoupe, Versatile, White

Flasher Control Switch, 12 VoltThe 8302311 Flasher Control Switch fits equipment brands such as: Allis Chalmers, Case, Case IH, Deutz, Gleaner, International, John Deere, Massey Ferguson, White

Optional Heavy Duty For 390254 and 390254NThe 120181N 14" Single Stage Pressure Plate, w/ 1-3/4" 17 Spline Hub - New fits equipment brands such as: InternationalThe 120181N is a substitute for the following discontinued products: 120181

High Pressure Switch, Normally Open, 250-375 PSIThe 88111266C1 High Pressure Switch, Normally Open, 250-375 PSI fits equipment brands such as: Case IH, International

Low Pressure Switch, Normally Closed, 6-34 PSIThe 88111267C3 Low Pressure Switch, Normally Closed, 6-34 PSI fits equipment brands such as: Case IH, International

High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size "HOBBS" housings with rubber grommets due to large cooling fins. It will not fit the "GUIDE" brand housings with the "rolled lip". Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.

30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.

PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.

The LED-408U is a complete LED light that can replace OEM PAR-36 style lights. It includes hardware for all 3 locations on a JD SG cab, in front fenders, top of rear fender, and top rear cab. 3200 lumen vs. the OEM lights at 600 lumens. This light uses 3D reflector cups for the best light output.

This upgraded replacement Fuse Panel is a direct replacement for the OEM Cartridge Type (round glass fuses). Updated to modern ATO/ATC standard blade fuses. Includes: Fuse Block Qty 1 - 5, 10, 20 & 30 Amp ATC/ATO Fuse Qty 3 - Female wire terminals & female terminal covers Wire marking label and replacement instructionsThe HH107356C3 Fuse Block, IH 86 Series fits equipment brands such as: International

This upgraded replacement FUSE BLOCK provides a direct replacement for the OEM CARTRIDGE TYPE - round glass fuses - to modern ATO/ATC STANDARD BLADE FUSES.